How to Properly Wear a Plate Carrier

Safety should always be the number one priority for all individuals. Moreover, those engaging in combat should, however, practice maximal safety measures to ensure they survive through the gunfights and bomb blasts. One way of guaranteeing for this is often through the use of body armour. Body armours such the best plate carrier are often essential to individuals in combat areas. They, however, need to be handled appropriately by ensuring that they are worn properly. This will henceforth protect the vital body organs such as the heart, lungs and the major blood vessels safeguarding an individual’s life in a war-torn and dangerous environment.

The process of wearing a plate carrier

Sizing and installation of the plate carrier

plate carrier

Before considering putting on a plate carrier, you should ensure that the carrier is the appropriate size. You do not want to wear an oversized plate carrier which will limit mobility and similarly an overly small size which will not offer sufficient protection and shielding.

The standard plate often recommended is the ten by 12 size, which usually fits perfectly on many people. However, depending on your chest size, you may select the best plate size.

After the acquisition of the appropriately sized materials, you may then install the plates into the carrier properly and tightly, that is, the front, back and side plates. The plate carrier is then ready for wearing in the following steps.

Positioning the front plate

You will put on the plate carrier through the head, centring it on your upper torso.

You will then adjust the shoulder straps, thereby moving the front plate into proper position. The top edge of the front plate should be in line with the sternal notch, the region where your sternum and the collar bones intersect.

You should also make sure that the front plate is perpendicularly placed with the top edge being horizontal to the shoulders and the shoulder straps being evenly lengthened.

Adjusting the side plates and straps

The side plates are often unique to each individual and the type of the carrier you are using. They, however, need to provide a snug feeling while on the body’s centre mass and allowing you free mobility. You will thus have to adjust the side plate straps to your preferred level of comfort in the field making sure it is not too tight or too loose which can restrict movements and also shift the front and back plate positions interfering with the purposes of the plates and the plate carrier.

Adjusting the backplate

The backplate should also be adjusted using the shoulder straps into the most appropriate position. The top edge of the backplate should be in alignment with the top edge of the front plate or even to a far higher tolerable level.

Confirming security of the plate carrier

This will follow after correctly positioning the plate carrier around the upper body trunk. You will tap on the plates to check whether they can hold up on severe impacts.

Also, you will have to move around while adjusting body positions to ensure that the mobility range in the plate carrier is sufficient and non-restrictive.

It is crucial to keep in mind that the plate carrier is to protect the vital organs around the rib cage and thus should not be worn inappropriately as this might expose these vital organs while shielding non-vital body parts.

Comments are closed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy